Museum-technology-source X-6000 Pushbutton Manuel d'utilisateur télécharger pdf

Switch mounts in 15/16” hole

Mounting the Pushbuttons.

The Pushbutton is shipped assembled, but easily separates into two parts for mounting.

To disassemble the Pushbutton, hold the bottom white switch part in one hand, and

with the other hand hold the black threaded barrel. Twist to the left and pull the switch

assembly out. Remove the mounting nut threaded onto the barrel section and set it

aside. Now place the threaded barrel section into the 15/16” hole in the exhibit surface

and secure it with the nut. Place the bottom white part back into the threaded section.

A twist to the right will lock the switch assembly firmly in place. Do not press the button

while mounting, as this will cause interference between the two pieces.

Insert Switch-Lampholder into

barrel of button assembly

While applying slight pressure, turn

Switch-Lampholder to right until it

clicks into

lace.

To remove, turn Switch-

Lampholder to left and

ull out.

Museum Technology Source Inc.

323 Andover Street Wilmington MA 01887

800-729-6873 978-657-3898 f 978-657-7132

www.museumtech.com

Installing X-6000 Illuminated Pushbutton

Rev 2-13

Switch mounts in 15/16” hole Mounting the Pushbuttons. The Pushbutton is shipped assembled, but easily separates

Pas de commentaire

Museum-technology-source X-6000 Pushbutton Manuel d'utilisateur